MediBio Health and Fitness Tracker

Powering Up Your MediBio Health and Fitness Tracker

The MediBio Health and Fitness Tracker helps you monitor your well-being by tracking sleep, stress, and heart rate. To get started, you’ll need to activate the tracker itself and connect it to the companion app. Here’s a detailed guide:

Turning on the Tracker:

Most MediBio Health and Fitness Tracker likely activate by pressing a button or tapping the screen. Consult your tracker’s manual or search online for the specific model if you’re unsure. Here’s a general guideline:

  1. Locate the power button/touchscreen: This is usually on the front or side of the tracker.
  2. Press and hold/Tap: A short press or hold (depending on the model) should turn on the tracker. You might see a logo or display lighting up to indicate it’s active.

If your MediBio Health and Fitness Tracker doesn’t turn on:

  • Charge it: A low battery might be the culprit. Connect your tracker to the charging cable that came with it and plug it into a USB port.
  • Clean the charging contacts: Make sure the charging contacts on both the tracker and cable are clean and free of debris.

Connecting the Tracker to the MediBio App:

  1. Download the App: Search for “MediBio Inform” on the App Store (iOS) or Google Play Store (Android) and download the app.
  2. Enable Bluetooth: On your smartphone or tablet, ensure Bluetooth is turned on.
  3. Open the MediBio App: Launch the app and follow the on-screen instructions for pairing a new device. This might involve selecting “add device” or searching for nearby Bluetooth devices.
  4. Select your Tracker Model: Choose the model of your MediBio Health and Fitness Tracker from the list provided in the app.
  5. Follow Pairing Instructions: The app might prompt you to enter a pin code or perform specific actions on the tracker itself to confirm pairing.

Leave a Reply

Your email address will not be published. Required fields are marked *